dxer ham radio dx news: Guest Post: Backpack Shack 3.0

Many thanks to SWLing Post contributor, TomL, who shares the following guest post as a his Backpack Shack 3 continues to evolve:

Backpack Shack 3.0 – Part 3

by TomL

I have now gone overboard since I think bigger must be better. The temptation was just too great and now there is an MFJ-1979 17-foot telescoping whip antenna in my car (with consequences).

MFJ Angst

I have a love/hate relationship with MFJ products because of what I think are useful ideas that are made somewhat poorly. But I went ahead and bought the large whip since I figured they could not possibly screw up something so simple, right?

Wrong. As I excitedly tried to screw the supposed 3/8”-24 threaded end into the nice standard Firestik K-11 magnet mount, I realized I was turning and turning it but it was not going in!!! I even had a small steel sliver of metal sticking into my flesh to prove I was not dreaming. The previous day, it had screwed in very tightly, but it did screw in. So, there I was after a long day of work, ready to listen to some SWL-Nirvana and I could not get the blasted antenna into the mount–? That Firestik mount is a VERY standard 3/8”-24 female thread and the other third-party antenna shafts fit perfectly and easily EVERY time I use them. I hate $60 of poor workmanship and MFJ seems to be the poster child of overpromising and underdelivering.

I was determined to make this work, by force if needed. One of the Trucker antenna shafts by necessity had an extra coupling nut on it to allow the extra 18 inch shaft to connect, so I took it off there and tried to thread it onto the MFJ-1979. It barely moved. Not to be thwarted, I dug out an adjustable wrench and 3/8” socket wrench with ½” socket and grunted and twisted and tightened until the coupling nut was threaded all the way “up its shaft”. That is what I feel like telling MFJ! That coupling nut is never coming off and now that I truly have bought it and cannot return it, I might as well use it.

The stainless steel telescoping rod is extremely thin and feels like it can bend and dent with any kind of mishandling. So it resides collapsed in a 27 inch PVC pipe with plumbing pipe foam inside to baby it when it is not being used. It remains to be seen if I can remember to “Handle With Care” when extending/collapsing it. We’ll see.

Ready-to-go

OK, so using the 18 inch antenna shaft attached to the magnet mount, then the coupling nut on the MFJ antenna, I extended it to a total of about 13 feet. With the DX Engineering Pre-amp turned on, and using the SDR Play RSP2, I was getting many signals booming in. All the usual names we are familiar with – RMI, CRI, Turkey, Cuba, etc. But also the noise level was very high. I know it is summer but I may have been overloading the Pre-amp a little bit. Here is an example, Radio Progresso from Cuba with some very nice acapella music but also a noisy background (plus, a noisy laptop computer pulse!):

https://archive.org/download/1806141258h11.54MHzSAMRFA4TibetanTinianIsAndKuwait/180613%20-%200150h%20-%204.765%20MHz%2C%20SAM%20RProgresso%20Cuba.mp3

Search This Blog